Discounts

2U Short Chassis design with 12x Hot Swap and as option SGPIO


Starting at: €220.00

Please Choose:





Add to Cart:


  • Description
  • Details
  • Reviews

Last chassis, this model is discontinued.

Special offer normal price 284 EUR now 220 EUR excl VAT.

This case is manufactured in the same factory and has same quality as SuperMicro.

 

Form Factor 2U chassis support for motherboard size:
6.7” x 6.7”(Mini-ITX),
9.6” x 9.6”(uATX),
12”  x 9.6”, 12” x 10”(ATX)
Processor Support Support Dual, Single Intel/AMD Processors
Dimensions(HxWxD) 3.5” x 17.2” x 21” (88.9 x 437 x 533.4mm)
Color Black (Front bezel only)
Expansion Slots CS-R26: 7 x Low-Profile Half-Length expansion slots
Drive Bays &Peripheral
Drives 
•      12 x 3.5" Hot-swap HDD Bays with 6G Backplane (12x SATA connetors on the backplane)
       -With 1 x Power On/Off button
       -With 1 x System Reset button
       -With Easy-Lock HDD Tray
System Cooling 3 x 8025mm FAN Module with removable bracket
System Monitoring Chassis intrusion switch

Slide Rail (Optional)

2U 17.2”, Ball-bearing,
Quick, Tool-free,
24” Thin Slide Rail
(Outer Rail Extendable Length:

25.6"~36.4", Max. Loading: 162kgs)

Front Panel Button
1 x Power On/Off button
1 x System Reset Button

LEDs
1 x Power LED
1 x HDD Activity LED
2 x Network LED  (Reserved, depends on MB SPEC)
1 x System Overheat LED (Reserved, depends on MB SPEC)
1 x Power Fail LED (Reserved, depends on MB SPEC)

Power Supply(Optional)

Support 2U Single Standard Power Supply

Dimension (HxWxD) 70 x 100 x 240mm
Power Supply (Optional) Support 2U (1+1) Redundant 
Dimension (HxWxD) 84 x 85 x 217mm
Product Safety and Environment
Specification

Operating Temperature    +10? ~ +35? (+50? ~ +95?)
Storage Temperature       -40? ~ +70? (-40? ~ +185?)
Operating Humidity          8~90% non-condensing
Storage Humidity             5~95% non-condensing 

Download the CS-R26 datasheet

SGPIO

SGPIO is an acronym for Serial General Purpose Input/Output which is a 4-signal (or 4-wire) bus used between a host bus adapter (HBA) and a backplane; of the 4 signals, 3 are driven by the HBA and 1 by the backplane. Typically, the HBA is a storage controller located inside a server, desktop, rack or workstation computer which interfaces with hard disk drives (HDDs) to store and retrieve data.

SGPIO interpretation and LED blinking patterns

Although many hardware vendors define their own proprietary LED blinking pattern, the common standard for SGPIO interpretation and LED blinking pattern can be found in the IBPI specification.

On backplanes, vendors use typically 2 or 3 LEDs per slot - in both implementations a green LED indicates presence and/or activity - for backplanes with 2 LEDs per slot, the second LED indicates Status whereas in backplanes with 3 LEDs the second and third indicate Locate and Fail.

Electrical characteristics of the SGPIO bus

The SGPIO bus consists of 4 signal lines and originates at the HBA, referred to as the initiator and ends at a backplane, referred to as the target. If a backplane (or target) is not present the HBA may still drive the bus without any harm to the system; if one does exist, it can communicate back to the HBA using the 4th wire.

The SGPIO bus is an open collector bus with 2.0 kΩ pull-up resistors located at the HBA and the backplane - as on any open collector bus information is transferred by devices on the bus pulling the lines to ground (GND) using an open collector transistor or open drain FET.

  • Model: CS-R26-01
  • Shipping Weight: 16Kg
  • 1 Units in Stock
  • Manufactured by: Ablecom

Be the first to write a review.  Write a Review.

This product was added to our catalog on Tuesday 20 November, 2012.

Customers who bought this product also purchased...


Content

Special Offers

Our special offers you will find here, click the button to open the page.



Special Offers